Legend
- Anchoring holes
- Stiffening flange
- Connecting location
The ArchiGreen® PER-P L-shaped plastic profiles are installed to aestheticly demarcate and to form garden paths, flower beds, outdoor stone floorings of patios, cast rubber flooring, gravel strips and lawns. The 100 mm depth paver edge restraint is also suitable to fulfil the role of ballast edge trims on extensive green roofs.
PER-P is made from UV-resistant recycled polyetylene. It is resistant to frost and to various acids that can be found in the soil. The thickness of the material is 4 mm.
During installation the ArchiGreen® PER-P paver edging restraint profiles (PER-P) are abutted at the connectiong locations on the end of each profile. Following the appropriate preparation of the foundation, these abutted profiles or borders are then fixed in place using anchoring nails (dia.16x250 mm) made of recycled plastic. These anchoring nails should be ordered separately. With the aid of a snips tool the stiffening flange can be easily cut to form curves quickly. The palstic borders are suitable to kerb the edging of various ballast/aggregate on terraces and patios. In the case of establishing linear retention schemes the number of anchoring nails needed to fix each plastic retainer profile is 3 to 4 nails whereas in the case of forming retention curves the number of anchoring nails increases to 4 to 6 nails per retainer. Once installed, the edge retainers are covered and the demarcation line between turf and other types of ballast is virtually invisible. Vehicles are prohibited to cross the paver edge restraint systems.
Installation example
Technical illustration
